System Advantages:
Simple synergic effect
High efficiency through hybrid technology
Optimal process stability through high control speed
Speed-controlled 4-roll motor
Digital V/A-meter met diagnose display
Modular design
Comfortable manual operation by means of large buttons
Tailor-made programs for special welding
Start and stop pulse for reliable ignition
Hot start en HYPERPULS
2/4 stroke control with or without crater filling
Adjustable arc force for stick welding
Integrated water cooling for the welding torch
Automatic after cooling for welding torch and power section
Shutdown in case of failure
A variety of special solutions
Exchangeable filter mat
Robot connection
Spot welding machine
Remote control
Big wheels
Lifting eyes
Can weld just about anything
Light to heavy materials
All construction work
Applications
Splash-free welding by means of a pulsating arc for all common materials and shielding gases with max. 20% CO2. A special ignition unit and extremely fast short-arc treatment that occur with small wire diameter and drive failures make the hybrid ideal for welding all solid and cored wires.
MIG / MAG PULSED LASSEN
Low-spatter short, normal and spray arc welding of solid wires from 0.8 to 1.6mm and cored wires from 1.0 to 2.4mm. The hybrid technology guarantees the highest process stability, especially in the lowest flow range, suitable for all shielding gases from 100% CO2 to 100% argon.
MIG / MAG NORMAL WELDING
Optimal smoothed DC properties for all electrode types from rutile to basic. Integrated hotstart with adjustable arc-force guarantees best welding properties (especially for cellulose electrodes) in all positions. High switchability for special electrodes with 100% penetration.
Leave the electrode
Gas bottle holder
[/et_tab][et_tab title=”Technical data” tab_id=”1600517309694-25534b4d-8707″]Specifications | Hybrid 4000M | Hybrid 6000M | |
---|---|---|---|
Primary: | |||
Mains | V | 3 x 400 | 3 x 400 |
Frequency | Hz | 50 / 60 | 50 / 60 |
Max. Power | kVA | 16.6 | 32 |
Cos. Africa | that. 0.95 | that. 0.95 | |
Open circuit voltage | V | 16.5-29.5 | 14-35 |
Efficiency | % | > 85 | > 85 |
Duty cycle %ED | / | 60 | 60 |
Fuseen | A | 3 x 25 slow (D) | 3 x 50 slow (D) |
Max. power fluctuations | % | + / - 10 | + / - 10 |
Secondary: | |||
Max. open circuit voltage | V | that. 70 | that. 75 |
Welding range | A | 15 - 400 | 15 - 600 |
Voltage Regulation | V | 15 - 50 | 15 - 50 |
Imax by 60% ID (met filter) | A / V | 400/34 | 600/44 |
Imax by 100% ID (met filter) | A / V | 320 / 30 | 450 / 36 |
Automatic overcurrent protection > 1s | A | 420 | 420 |
Max. pulse current | A | >1000 | >1000 |
Puls Frequency (synergic adjustable) | 1 - 500 | 1 - 500 | |
SmoorspoelRegulation(synergic adjustable) | 2 x 16 steps | 2 x 16 steps | |
Protection class | IP23 | IP23 | |
Primary Connection | mm² | 4 G 4 + 4 | 4 G 6 + 6 |
Welding cable | mm² | 70 | 95 |
Weight | kg | that. 120 | that. 140 |
Dimensions | l x b x h | 850 x 465 x 1000 | 850 x 465 x 1000 |
MACHINES | |
---|---|
Hybrid PULS 4000 | 100.212.400 |
Hybrid PULS 6000 | 100.212.600 |
ACCESSORIES | |||
---|---|---|---|
Welding torch (ERGOGRIP) | 3m | 4m | 5m |
MB15 | 002.0514 | 002.0515 | 002.0516 |
MB24 | 012.0158 | 012.0159 | 012.0160 |
MB25 | 004.0376 | 004.0377 | 004.0.78 |
MB26 | 018.0132 | 018.0133 | 018.0134 |
MB36 | 014.0191 | 014.0192 | 014.0193 |
MB45 | |||
MB61 | |||
MB240 | |||
MB401 | 033.0182 | 033.0193 | 033.0194 |
MB501 | 034.0292 | 034.0293 | 034.0294 |
MB602 | |||
MB610 | |||
MB452 | |||
MB535 | |||
MB645 | |||
PUSH PULL (straight) | 4m | 8m | |
PP24-26-36 | 081.0029 | 081.0033 | |
PP240-401-501 | 091.0037 | 091.0043 |